Porsche PAS Replacement Cost: Mail-In Clone vs. Dealer
What a Porsche PAS replacement costs by mail
If your water-cooled 911, Boxster or Cayman won't start or won't recognize its keys, and the PAS unit has been confirmed as the problem, you can replace it by mail without starting over on keys. At Duvall's Auto Lab, we program a donor PAS you send us for $695. If you don't have a donor, we supply a tested used PAS unit programmed to your car for $1,795. Either way, we clone your original PAS into the replacement, so your car, engine computer and existing keys all match again. Shipping both ways is extra, and return shipping is added to your invoice at cost.
The dealer route usually means a new unit plus programming at the dealership, and often new keys too. We can't give you dealer prices, because they vary by location and by car. Call your local Porsche service department for a quote and compare it with the two flat prices above.
What the PAS does and why it fails
PAS is Porsche's name for the immobilizer and alarm unit on water-cooled 911 and Boxster / Cayman models. It stores the key data and talks to the engine computer every time you try to start the car. If the PAS doesn't recognize the key, or can't complete its handshake with the engine computer, the car won't start.
When a PAS fails, the symptoms usually look like this:
- The engine cranks but won't fire, or won't crank at all
- The car no longer recognizes keys that worked yesterday
- Alarm or immobilizer behavior that doesn't make sense
These symptoms can also come from a bad key, low voltage, wiring trouble or an engine computer problem. We can't diagnose a car by mail, so you or your shop need to confirm the PAS is the failed part before you order anything. A good independent Porsche shop can usually check this quickly.
Why a used PAS won't just plug in
A PAS from another car still has that car's key data and engine computer pairing. Put it in your car without changing anything and you get the same no-start, because your keys and engine computer don't know it.
This is why cloning matters. We read the data from your original PAS and write it to the replacement. Once it's installed, the new unit looks the same to your car as the old one did:
- Your existing keys keep working
- The engine computer accepts it
- You don't need to program new keys or pair the engine computer at the dealer
This is the same reason other immobilizer-linked modules have to be cloned or programmed rather than just swapped. We explain that in more detail in our guide to ECU replacement cost: clone by mail vs. dealer programming.
Donor unit or ours: which option fits
Send a donor PAS ($695). Choose this if you or your shop already have a matching used PAS, from a salvage yard or a parts car for example. You send both your original PAS and the donor, we clone your data into the donor, and we bench-test it before it ships back.
Use a tested PAS from us ($1,795). Choose this if you don't have a donor or don't want to go looking for the right part number. You send your original PAS, we supply a tested used unit, program it to your car and bench-test it before shipping.
Both options get the same cloning and bench testing. The only difference is who provides the replacement unit.
Porsche models we cover
| Model | Years |
|---|---|
| 911 (996) | 1999–2004 |
| 911 (997) | 2005–2012 |
| Boxster / Cayman (986 / 987) | 1997–2012 |
| Boxster / Cayman (981) | 2013–2016 |
| Carrera GT | 2004–2007 |
Don't see your car? Call 908-777-5741 and we'll check. If you own a 996, our Porsche 996 PAS replacement guide covers that car in more detail.
What to send us
- Your original PAS unit. We need it to clone your car's data.
- A donor PAS, if you chose the $695 option.
- The packing slip from your confirmed order.
- Proof of ownership. Immobilizer work requires a vehicle registration plus photo ID, or a shop work order.
Pack the units well in padded material, in a sturdy box.
How mail-in service works
- Look up your vehicle on our Porsche PAS replacement page.
- Send a request with your VIN and the PAS part number.
- Pay the invoice. We confirm the job by VIN and part number before anything ships, so you never mail a part we can't work with.
- Ship the module(s) with the packing slip. We're mail-in only, at our lab in Columbia, NJ, and we serve all 50 states. There's no walk-in service.
- Plug it back in. Most jobs ship back within 1 to 3 business days of arriving. You choose ground, 2-day or overnight for the return.
Every programming and cloning job has a 3-month warranty. If we can't complete the job, we send your part back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.
Our service is built for repair shops, and owners are welcome too. Many owners have their regular shop pull the PAS, mail it to us, then reinstall the programmed unit.
Frequently asked questions
Will I need new keys after a PAS replacement?
Usually not. We clone your original PAS, so the replacement already has your key data and your existing keys keep working. If a key itself is damaged or lost, that's a separate job. Ask when you place your order.
Can you just delete or bypass the immobilizer instead?
No. We don't offer immobilizer deletes. A cloned PAS brings back normal operation, with the security system working as Porsche designed it.
My car won't start. Can you tell me whether it's the PAS?
We can't diagnose a car by mail. Have your shop confirm that the PAS is the failed module first, since keys, wiring, battery voltage and the engine computer can all cause similar no-start problems. Once it's confirmed, we can take it from there.
Ready to get your Porsche running again?
Once you've confirmed the PAS is the problem, start a PAS order with your VIN and part number, call 908-777-5741 (Mon to Fri, 9am to 6pm), or email sales@duvallsautolab.com. We'll confirm the job before anything goes in the mail.
