Porsche 996 PAS Replacement: Immobilizer Fix by Mail
Can a failed PAS on a 996 be replaced without new keys?
Yes. If your 1999–2004 Porsche 911 (996) won't start or won't recognize its keys, and the PAS immobilizer unit has been confirmed as the problem, we can clone your original PAS into a replacement unit by mail. The replacement then matches your car, your engine computer and your keys, so you keep the keys you already have. Send us a donor PAS and we'll program it for $695. If you don't have one, we can supply a tested used PAS, programmed to your car, for $1,795.
The rest of this article covers what the PAS does, why a used unit won't work if you just plug it in, what to send, and how our mail-in process works.
What the PAS does on a 911 996
The PAS is the immobilizer and alarm unit on water-cooled 911s, including the 996, and on Boxster and Cayman models. It holds the key data for your car and talks to the engine computer. When you turn the key, the PAS checks that the key belongs to the car and tells the engine computer it's okay to run.
When the PAS fails, that check breaks down. The usual symptoms:
- The car cranks but won't start, or won't crank at all
- The car doesn't recognize keys that used to work
- The alarm and immobilizer behave erratically
Plenty of other faults can cause a no-start, though, so read the next section before you pull anything out.
Confirm the failed module first
We can't diagnose a car by mail. Before you send anything, you or your repair shop need to confirm that the PAS is the part that failed. A weak battery, a worn key, wiring problems or an engine computer fault can all look like an immobilizer failure. A shop with a Porsche-capable scan tool can usually tell you which module is at fault.
Once the PAS is confirmed, write down two things before you call or order: your VIN and the part number on the PAS label. We confirm every job with both before anything goes in the mail.
Why a replacement PAS has to be cloned
A used PAS from a salvage yard or online seller still holds the key data and engine computer pairing from the car it came out of. Plug it into your 996 and it won't recognize your keys or your engine computer, and the car still won't start.
Cloning solves that. We read the data from your original PAS and write it to the replacement, so the new unit knows your keys and your engine computer the same way the old one did. You don't need a new engine computer or new keys, and once it's installed the car should work the way it did before the PAS failed.
This is why we ask for your original PAS even though it has failed. In most cases the data can still be read off the old unit and moved to the replacement.
Your two options
Program your donor PAS: $695 If you already have a compatible replacement PAS, send it to us with your original. We clone your car's data onto the donor and bench-test it before it ships back.
Tested used PAS from us: $1,795 If you don't have a donor, we supply a tested used PAS and program it to your car. You send your original unit and we handle the rest.
Either way, the unit is programmed and tested on the bench before it ships. Every programming and cloning job comes with a 3-month warranty.
What to send us
Once your order is confirmed, your package should include:
- Your original PAS unit, the failed one from the car
- Your donor PAS, if you're using the $695 option
- The packing slip from your order
- Proof of ownership, which is required for all key and immobilizer work. That means a vehicle registration plus photo ID, or a shop work order if a repair shop is sending it.
Pack the modules well. Wrap each unit on its own and use a sturdy box with padding so nothing moves around in transit.
How mail-in service works
We're a mail-in lab and we work with owners and repair shops in all 50 states. The process:
- Look up your vehicle on our Porsche PAS replacement page. The 911 (996), 1999–2004, is on our covered list.
- Send a request with your VIN and the PAS part number.
- Pay the invoice. You choose ground, 2-day or overnight return shipping, and we add it to the invoice at cost.
- Ship the module(s) to us with the packing slip.
- Plug it back in when it comes back.
Nothing should ship until we've confirmed the job by VIN and part number. You pay shipping both ways. Most jobs ship back within 1 to 3 business days after they arrive. Our hours are Monday to Friday, 9am to 6pm.
If we can't complete the job, we send your parts back and refund the service charge. You pay return shipping and a $95 bench-test fee.
A note for repair shops
A lot of our PAS work comes from independent shops that have already diagnosed the no-start and need the module side done right. Include your shop work order as proof of ownership and we'll ship the programmed unit back to your shop, ready to install. If the diagnosis points to the engine computer instead, see our ECU replacement and cloning service. For newer Porsches with keyless entry and start, we also offer Kessy module repair and cloning.
What we don't do
We don't offer immobilizer deletes or bypasses. A cloned PAS keeps your car's immobilizer working as designed, with your existing keys.
Frequently asked questions
Will my existing 996 keys work with the replacement PAS?
Yes. Because we clone your original PAS, the replacement carries the same key data, so the keys that worked before should work again. We're cloning your car's data, not starting from scratch.
Can I just buy a used PAS and plug it in?
No. A used PAS is still paired to the car it came from, so your 996 won't accept it as-is. It has to be cloned with your original unit's data first. You can send that used unit to us as a donor for the $695 programming option.
What if I don't have a donor PAS?
We can supply a tested used PAS and program it to your car for $1,795. Just send your original unit, your VIN and part number details, and proof of ownership.
Ready to get your 996 running again?
Once your shop has confirmed the PAS is the problem, start a PAS order or call us at 908-777-5741. You can also email sales@duvallsautolab.com with your VIN and PAS part number. We'll confirm the job before you ship anything.
Porsche PAS Immobilizer Programming: How It Works by Mail
Porsche PAS Immobilizer Programming: How It Works by Mail
Yes, PAS immobilizer programming for the 996 is exactly what we do, by mail, for shops and owners across all 50 states. Once your immobilizer problem has been traced to the PAS unit, we read the key and engine computer data off your original PAS and write it into a replacement, so the car accepts the keys you already own. There's no deleting or bypassing the immobilizer and no starting from scratch.
To get your unit into our bench queue, pack up your original PAS (the failed one), a donor PAS if you're supplying your own, and the packing slip from your confirmed order. You'll also need proof of ownership, either a vehicle registration and photo ID or a shop work order, since that's required for any key or immobilizer job.
The mail-in process is straightforward: look up your 996 on our site, send in your VIN and PAS part number so we can confirm the job before anything ships, pay the invoice with your choice of return shipping, then mail the modules to our lab. We bench-test the unit before it goes back out. Shipping runs both directions, most jobs turn around in 1 to 3 business days after arrival, and we're open Monday through Friday, 9am to 6pm.
How long does porsche pas immobilizer programming take?
Once your PAS unit arrives at our lab, most jobs ship back within 1 to 3 business days. We're open Monday to Friday, 9am to 6pm.
Do I need to send my keys for pas immobilizer programming?
No, you don't send your keys. We clone the data from your original PAS onto the replacement, so the keys you already have continue to work.
What proof of ownership do I need for pas immobilizer programming?
A vehicle registration plus photo ID, or a shop work order if a repair shop is sending the unit in. This is required for all key and immobilizer work.
