Duvall's Auto LabClinical Care
for Modern Machines

Mercedes IR Key Programming Cost: Mail-In vs. Dealer

What a new key for an older Mercedes costs by mail

If you have an older Mercedes with an infrared (IR) remote, or an RF remote with a transponder, you can get a new key made by mail. You send us the immobilizer module from the car and we build the key to it on the bench. There are two prices: $565 for an aftermarket transponder key with no buttons, programmed to your car, and $750 for an aftermarket remote key, programmed to your car. Programming is included in both. It doesn't matter whether you still have one working key or you've lost them all.

Dealer pricing is different. It depends on the model, how old the car is, and what the dealer can still order for it. Some dealers want the car brought in, which means a tow if no keys are left. Before you decide, call your dealer for a quote and ask whether they need the car on site.

Why older Mercedes keys are hard to replace

Most late-1990s and early-2000s Mercedes cars aren't like a modern car, where a key can often be added through the diagnostic port. The key data for these cars is stored in a control module, and the right module depends on the model:

  • Immobilizer: infrared FBS2/FBSX cars such as the C-Class W202, E-Class W210, and the IR-remote W140 S-Class and R129 SL
  • SKREEM: the RF-remote W140 and R129, the SLK R170, and the Chrysler Crossfire
  • AAM / EAM: the ML W163
  • WSP immobilizer: the T1N Sprinter (W901–W905), both Mercedes and Dodge
  • EIS (FBS3): the W906 Sprinter

That module decides which keys are allowed to start the car. A new key needs the right data written into it to match the module. You can't just buy a blank, cut it, and expect the car to start. Because the data is in the module, we can read it on the bench and write a matching key, and we don't need the car or a working key to do it.

Later cars with the EZS ignition switch use a different system. If you have one of those, see our Mercedes EIS & ESL programming service.

Mail-in vs. the dealer: how they compare

Price you know up front. By mail you pay $565 or $750, plus shipping both ways. Return shipping is added to your invoice at cost, and you choose ground, 2-day, or overnight.

No car visit and no tow. You take out one module and ship it. The car stays where it is, whether that's your driveway or your shop.

All keys lost is fine. We build the key from the module, so you don't need to send a working key.

Aftermarket vs. genuine. Our keys are aftermarket units programmed to your car. A dealer will usually sell a genuine Mercedes key if one is still available for your model. If you want a genuine part, ask the dealer what they can get and how long it will take.

Turnaround. Most mail-in jobs ship back within 1 to 3 business days after they arrive. Add your shipping time each way. Dealer timing depends on parts availability and their service schedule.

What to send for your model

Find your car in the model table on our Mercedes IR remote key programming page. A few things to check:

  • W140 S-Class and R129 SL were built with either an infrared or an RF remote. Look at the key you have, or had, and use the matching row. IR cars send the immobilizer. RF cars send the SKREEM module.
  • ML W163 depends on the build date. Cars built through 11/1999 send the AAM from the engine compartment. Cars built from 12/1999 send both the EAM (under the steering column) and the AAM.
  • T1N Sprinter sends the WSP module, which sits behind the instrument cluster.
  • W906 Sprinter sends the EIS, which is the ignition switch.

Check the failed part first. We can't diagnose a car by mail. If the car won't start and you aren't sure the key is the cause, have your shop confirm what's wrong before you pull anything out. A bad module, a bad key, and a starting or fuel problem can all look alike at the driveway.

How mail-in key programming works

  1. Look up your vehicle on our website to see which module you need to send.
  2. Send a request with your VIN and the module part number. Nothing ships until we confirm the job by VIN and part number.
  3. Pay the invoice. Key and immobilizer work requires proof of ownership: your registration plus a photo ID, or a shop work order.
  4. Ship the module with the packing slip. Pack it well, because a cracked housing or bent pins only makes things harder.
  5. Plug it back in. We program everything and test it on the bench before it ships, and the module and new key come back ready to install.

Every programming job comes with a 3-month warranty. If we can't complete the job, we send your module back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

You may also need the blade cut. Mention it when you send your request, since we also cut keys by VIN for $155 flat.

For repair shops

A lot of our work comes from independent shops. They don't have a way to program keys for these older systems, and they don't want to send a customer to the dealer. You keep the car in your bay, pull the module, and ship it to us, and it comes back ready to install. If you work on later Mercedes too, our W204 C-Class EIS & ESL programming page covers a common job on newer cars.

Frequently asked questions

Do I need a working key to get a new one made?

No. We write the new key from the data in your module, so all keys lost is fine. If you still have a working key, the process and the price stay the same.

Is the $565 or $750 the total cost?

That's the price for the key and its programming. Shipping both ways is extra, and return shipping is added to your invoice at cost based on the speed you pick. If you also need the blade cut by VIN, that's a separate $155 flat service.

Can you make a key if I send just the car's VIN?

For these older Mercedes systems, we need the module, because the key has to be written to match the data stored in it. Send your VIN and module part number with your request so we can confirm the right job before you ship anything.

Ready to get a key made?

First, confirm the module for your model. Then start your order with your VIN and module part number. You can also call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com. We'll confirm the job before anything ships.

Start an order Call 908-777-5741