Mercedes EIS and ESL Programming, Done by Mail
What the EIS and ESL Do in Your Mercedes
Need Mercedes EIS programming? Duvall's Auto Lab handles Mercedes EIS and ESL programming by mail for owners and repair shops in all 50 states. You send us the module, or we source a programmed replacement unit if you don't have one to send. We repair, clone or program it to your VIN, and we ship it back ready to plug in. Most jobs ship back within 1 to 3 business days of arriving.
The EIS (Electronic Ignition Switch) is the slot or switch where your Mercedes key goes. It's also a core part of the immobilizer system. It reads the key, checks that the key belongs to the car, and lets the rest of the vehicle know it's okay to start. Mercedes techs often call it the EZS.
The ESL (Electronic Steering Lock) locks and unlocks the steering column. It works with the EIS, so when it fails, the key may not turn and the car may not start, even when every other part of the car is fine. You may also see it called the ELV.
The two modules depend on each other and on your keys. That's why replacing one usually takes programming, not just a plug-and-play part swap.
Signs Your Shop May Point to a Failed EIS or ESL
We can't diagnose a car by mail. You or your repair shop need to find the failed module before you send anything. These are common complaints that lead a shop to check the EIS or ESL:
- The key goes in but won't turn
- The car doesn't respond to the key at all, no dash lights and no crank
- A steering lock warning or message on the instrument cluster
- The car starts some days and not others
- Remotes or keys that used to work stop being recognized
- Diagnostic codes stored in the EIS or ESL after a scan
Plenty of other problems can look like these, including a weak key battery, wiring faults or a low vehicle battery. A proper scan is the best first step. When your shop confirms the EIS or ESL is the problem, we can take it from there.
Repair, Cloning or a Programmed Replacement Unit
Depending on what's wrong and what you have on hand, there are a few ways to get your Mercedes running again:
Repair. If the module itself has failed, we can often repair your original unit. It keeps its programming, so it goes back in the car the way it came out.
Cloning. If the module can't be saved, we can move the data from your original EIS or ESL to a replacement. A cloned unit takes over your car's identity, so it works with your existing setup.
VIN programming. Some jobs need a module programmed to your car's VIN so it matches the rest of the vehicle.
Programmed replacement unit. If you don't have a module to send, for example because it's missing or damaged beyond use, we can source a replacement unit and program it for you.
When you send your request, we'll confirm which option fits your car. Nothing ships until the job is confirmed by VIN and part number.
Matching Keys to Your EIS
Your keys and your EIS have to agree with each other, or the car won't start. We do mail-in key programming for Mercedes, including Mercedes IR remote key programming, one of our specialties. We can help with:
- Duplicate keys when you have a working key and want a spare
- All keys lost when no working key is left
- Keys to match a repaired, cloned or replacement EIS
We also cut keys by VIN for $155 flat.
Just to be clear: we don't do immobilizer deletes or bypasses. Every job we do keeps your car's factory security working the way it was designed to.
What to Send: VIN, Module Part Number and Proof of Ownership
Here's how a Mercedes EIS or ESL job works:
- Look up your vehicle on our website at duvallsautolab.com.
- Send a request with your VIN and the module part number. The part number is printed on the label of the EIS or ESL.
- Pay the invoice once we've confirmed the job.
- Ship the module with the packing slip we provide.
- Plug it back in when it comes home.
Proof of ownership is required for all key and immobilizer work, and that includes EIS and ESL jobs. Send one of these:
- Vehicle registration plus a photo ID, or
- A shop work order if a repair shop is sending the job
These rules protect you and your car. We built our service for repair shops, but owners are welcome too.
Shipping, Turnaround, Warranty and What Happens If We Can't Fix It
Shipping. You pay shipping both ways. You send the module to us, and we add return shipping to your invoice at cost. You pick ground, 2-day or overnight.
Turnaround. Most jobs ship back within 1 to 3 business days of arriving. Our hours are Monday to Friday, 9am to 6pm.
Warranty. Every repair, programming and cloning job comes with a 3-month warranty.
If we can't fix it. If we can't repair your module, we send it back and refund the service charge. You pay return shipping and a $95 bench-test fee.
We're based in Columbia, NJ. We're mail-in only, so we don't offer walk-in service. If you're in North Jersey and need on-site key or lock work, our sister company, Duvall Lock & Key, handles on-site jobs.
Get Your Mercedes EIS or ESL Programmed
Ready to start? Look up your vehicle and send your request at duvallsautolab.com. If you have questions about your Mercedes EIS or ESL, call us at 908-777-5741 or email sales@duvallsautolab.com, Monday to Friday, 9am to 6pm.
Frequently Asked Questions
Can you program a Mercedes EIS by mail?
Yes. Send us your VIN and the module part number. Once the job is confirmed, you pay the invoice and ship the EIS with our packing slip. We repair, clone or program it and ship it back. Most jobs ship back within 1 to 3 business days of arriving.
What if I don't have my old EIS or ESL to send?
We can source a programmed replacement unit for you. Send your VIN and vehicle details, and we'll confirm the job before anything ships.
Do I need new keys after replacing the EIS?
Your keys have to match your EIS. Whether you need new keys depends on the job. Repaired and cloned units often keep working with your existing setup, and some replacements need keys matched to them. We do mail-in Mercedes key programming, including duplicates and all keys lost, and we'll tell you what your job needs when we confirm it.
Can you tell me whether my EIS or ESL is the problem?
No. We can't diagnose a car by mail. You or your repair shop need to identify the failed module first, usually with a diagnostic scan, before you send it to us.
What do I need to send for Mercedes EIS or ESL work?
Send your VIN, the module part number, and proof of ownership. Proof of ownership can be your registration plus a photo ID, or a shop work order. It's required for all key and immobilizer work.
