Duvall's Auto LabClinical Care
for Modern Machines

Mercedes CLK W209 EIS & ESL Programming by Mail

Can a CLK W209 EIS or ESL be programmed by mail?

Yes. If your 2003–2009 Mercedes-Benz CLK (W209) won't turn on, the key won't turn, or the steering stays locked, we can program a replacement EIS (ignition switch) or ESL (steering lock) to your car by mail. It comes back plug and play. The CLK W209 is on our FBS3 coverage list. Before anything ships, we check your VIN and module part number so we know exactly what your car has and what it needs.

You do need to know which part has failed first. We can't diagnose a car by mail, so you or your shop has to confirm it's the EIS or the ESL before you place an order.

What the EIS and ESL do on a CLK

The CLK W209 uses Mercedes' FBS3 key system. Two modules handle starting the car:

  • EIS (electronic ignition switch, also called the EZS): This is where you put the key. It reads the key and switches the car on.
  • ESL (electric steering lock, also called the ELV): This locks and unlocks the steering column.

The two modules have to match each other, and both have to match your keys. If one fails, or if someone fits a unit from another car without programming it, the car won't turn on or the steering won't unlock.

Not every car on our list has an ESL fitted. We check whether your CLK has one by VIN before you ship anything.

Common symptoms

These are the complaints that usually lead back to the EIS or ESL:

  • The key goes into the ignition but won't turn
  • The dash stays dark when you turn the key
  • The steering wheel stays locked and won't release
  • The car won't turn on even though the key and battery are fine

Lots of other faults can look like this, such as a weak battery, a damaged key, or wiring problems. That's why your shop needs to pin down the failed module before you send it to us. If the steering lock is your main problem, our guide on Mercedes steering wheel lock and ESL failure explains what to look for.

Why a replacement unit has to be programmed

You can't just bolt in an EIS or ESL from a salvage yard. Each unit is tied to one car and one set of keys. A used module from another CLK will still be matched to that car, and a new one is blank. Either way, it has to be programmed to your vehicle so it works with your other module and your keys. That's what we do.

Your options and prices

These are the prices on our Mercedes EIS & ESL programming page:

For a failed ESL (steering lock):

  • $395: ESL emulator, programmed
  • $795: ESL, tested used, programmed
  • $1,395: ESL, new OEM, programmed

An emulator goes in place of the failed steering lock. A tested used or new OEM ESL replaces it with another real steering lock. Every option comes back programmed to your car.

For a failed EIS (ignition switch):

  • $995: EIS, tested used, programmed
  • $1,895: EIS, new OEM, programmed

Already bought a unit? If you've picked up your own used or new EIS or ESL, send it in with your original and we'll program it to your car. Contact us for a quote on that job.

Return shipping is added to your invoice at cost, with a choice of ground, 2-day or overnight. You pay shipping both ways.

What to send us

Once we've confirmed the job by VIN and part number, here's what usually goes in the box:

  • Your original EIS (and the ESL if it's part of the job), or your own replacement unit together with your original
  • Your key, so the unit can be programmed to match it. If you only have one working key, send that one.
  • The packing slip we send you with your invoice
  • Proof of ownership: vehicle registration plus a photo ID, or a shop work order. We need this for all key and immobilizer work.

If you don't have a module to send, we can source a programmed replacement for you once your model and part number are confirmed.

Pack modules carefully in padding. Don't loosely tape keys to the outside of a part.

How mail-in service works

We're a mail-in lab in Columbia, NJ, and we work with repair shops and owners in all 50 states. There's no walk-in service. The process goes like this:

  1. Look up your vehicle on our website.
  2. Send a request with your VIN and the module part number.
  3. Pay the invoice. We confirm the job by VIN and part number before anything ships.
  4. Ship the module with the packing slip.
  5. Plug it back in. The unit arrives programmed and ready to install, by you or your mechanic.

Most jobs ship back within 1 to 3 business days of arriving. Every repair, programming and cloning job comes with a 3-month warranty.

If we can't fix a module, we send it back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

Need keys too?

EIS and ESL work is often only part of the job. If you also need keys for an older Mercedes, see our Mercedes IR remote key programming service. We also program keys by mail, whether you need duplicates or have lost all your keys.

Frequently asked questions

Can you tell me whether it's my EIS or my ESL that failed?

No, we can't diagnose a car by mail. You or your repair shop needs to confirm which module has failed before ordering. After that, we confirm the job by VIN and part number before you ship.

Will an ESL emulator work on my CLK W209?

First we check by VIN whether your CLK has an ESL. If it does, the emulator ($395, programmed) is one of three ways to fix it, along with a tested used ESL ($795) or a new OEM ESL ($1,395). Every option comes back plug and play.

Can you remove or bypass the immobilizer instead?

No. We don't do immobilizer deletes. We program replacement units so your CLK's security system works as Mercedes designed it, with your keys.

Start your order

If your shop has confirmed a failed EIS or ESL on your CLK W209, look up your vehicle at duvallsautolab.com and send us your VIN and module part number. You can also call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com. We'll confirm the job and send your invoice and packing slip.

Start an order Call 908-777-5741