Chevy ECM & PCM Replacement and Cloning by Mail
Why your replacement Chevy engine computer won't start the car
If you put a used or new ECM or PCM in a Chevrolet and the engine won't run, the replacement probably doesn't have your car's VIN and immobilizer data. The engine computer has to be cloned from your original unit or programmed to your VIN before it will start the car on your existing keys. Duvall's Auto Lab does this by mail. Mail us the original and the replacement, and we send back a computer that plugs in and runs. ECU cloning or VIN programming starts from $225, and the vehicle lookup on our website shows the exact price for your car.
We do this work for these Chevrolet models and controllers:
- Astro: PCM (P01 / P59)
- Avalanche: PCM (P01 / P59) and ECM (E38 / E67)
- Aveo: ECM / PCM
- Blazer: ECM (E92 / E80)
- Blazer EV: ECM (E99 / E90)
- Blazer S10: PCM (P01 / P59)
- Bolt EV/EUV: ECM (E92 / E80)
- Camaro Gen 5: ECM (E92 / E80)
- Camaro Gen 6: ECM (E92 / E80)
- Captiva: ECM (E92 / E80)
- Cavalier: PCM (P01 / P59)
What the engine computer does
Chevrolet calls it the ECM (engine control module) or the PCM (powertrain control module), depending on the year and model. Most people just say ECU. It runs fuel, spark and other engine functions, and it also handles security. Before it lets the engine run, it talks to the immobilizer and checks the VIN and key data.
That security check is why a straight swap usually doesn't work. A computer from a junkyard truck still carries the other vehicle's VIN and security data. A new unit has none of your car's data. Either way, your car won't accept it. Typical results are a no-start, a crank with no start, or an engine that fires and then dies right away.
Cloning vs. VIN programming
There are two ways to get a replacement working:
- Cloning. We copy the data from your original computer onto the replacement. The clone carries the same VIN, immobilizer and key data as the original, so your car treats it as the module it already knew. Cloning works best when the original can still be read on the bench, even if it no longer runs the car properly.
- VIN programming. We program the replacement to your VIN and match it to your car's immobilizer, so the keys you have keep working.
We confirm which method fits your job before you ship, using your VIN and the part number on the module.
First, confirm the computer is the part that failed
We can't diagnose a car by mail. Before you order, you or your shop needs to confirm that the engine computer is the failed part. No-starts, stalls and communication problems can also come from wiring, grounds, connectors, sensors, a weak battery or a different module. If a good computer goes into a car with a wiring fault, it can have the same problem again.
Repair shops usually know the cause before they call us. If you're an owner, have a shop scan the car and confirm the ECM or PCM first.
What to send us
For a standard clone or VIN programming job, send:
- Your original engine computer, even if it has failed. It usually holds the data we need.
- The replacement computer you want to use. It should have the same part number, or a part number that is confirmed compatible.
- The packing slip you get after you order, so we can match the modules to your job.
Don't have a replacement? We can source a tested used ECU and program it to your car. The vehicle lookup shows that price too.
Proof of ownership: Because this is immobilizer-related work, have your registration and a photo ID ready. Shops can send a work order instead.
How mail-in service works
We're mail-in only and work with shops and owners in all 50 states. There's no walk-in service. The process:
- Look up your vehicle on our website to see coverage and the price.
- Send a request with your VIN and the module part number.
- Pay the invoice. Nothing ships until we've confirmed the job by VIN and part number.
- Ship the modules with the packing slip.
- Plug it back in when it comes back.
Most jobs ship back within 1 to 3 business days after they arrive. You pay shipping both ways. We add return shipping to your invoice at cost, and you can choose ground, 2-day or overnight.
Every repair, programming and cloning job comes with a 3-month warranty. If we can't complete the job, we send your module back and refund the service charge. You pay the return shipping and a $95 bench-test fee.
For pricing details and the full list of makes we cover, see our ECU replacement and cloning service page.
Related services
If you also need a spare key, we offer car keys cut by VIN by mail, so you don't have to ship a door lock. Shops that work on European cars as well can send us immobilizer work like Mercedes EIS & ESL programming.
Frequently asked questions
Will my existing Chevy keys work with the replacement computer?
Yes, that's the goal. A cloned or VIN-programmed replacement is matched to your car's immobilizer data, so the keys you already have keep working.
Can I use a used ECM or PCM from a salvage yard?
Usually, yes, as long as the part number matches your original or is confirmed compatible. Send us the part number with your VIN when you request the job, and we'll confirm it before anything ships. A used unit won't start your car until it's been cloned or programmed.
What if my original computer is completely dead?
Send it anyway. Many failed units can still be read on the bench. If yours can't, tell us when you request the job, and we'll go over VIN programming or a sourced replacement before you ship.
Start your order
Once you've confirmed the engine computer is the failed part, look up your Chevrolet on our website and send a request with your VIN and module part number. Questions? Call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com.
