Duvall's Auto LabClinical Care
for Modern Machines

Porsche Alarm Goes Off Randomly or Won't Disarm? PAS Fix

Why your Porsche alarm goes off randomly or won't disarm

On water-cooled 911, Boxster and Cayman models, an alarm that goes off by itself or won't disarm often points to the PAS. That's the immobilizer and alarm unit. If the PAS is failing, you'll often see other symptoms too: the car won't start, or it stops recognizing its keys. Once you've confirmed the PAS is the problem, the fix is a replacement that has been cloned from your original unit, so the car, the engine computer and your keys all match again. We do that by mail for $695 if you send a donor unit, or $1,795 if we supply a tested used PAS programmed to your car.

Before you buy anything, make sure the PAS really is the cause. Plenty of other things can make an alarm misbehave, and we can't diagnose a car by mail.

What the PAS does

The PAS does two jobs in one box:

  • Alarm: it watches the car's security system and decides when to arm, disarm and sound the alarm.
  • Immobilizer: it holds the key data and talks to the engine computer. When you turn the key, the PAS checks that the key belongs to the car and then tells the engine computer it's OK to start.

Because one unit handles both jobs, an internal fault can show up as alarm trouble, starting trouble, or both. Common complaints include:

  • The alarm goes off with nobody near the car
  • The remote won't arm or disarm the car, or only works now and then
  • The alarm keeps sounding after you unlock the car
  • The car cranks but won't start, or won't crank at all
  • A key that used to work isn't recognized anymore

Check these first

A wandering alarm isn't always a bad module. A shop should rule out the simple causes before anyone pulls the PAS:

  • Battery and charging: low or unsteady voltage can make security systems act strangely.
  • Key fob battery: a weak fob battery can cause unreliable arming and disarming.
  • Door, hood and trunk switches: a faulty switch can make the car think someone opened it.
  • Water and corrosion: look for signs of water inside the cabin, plus damaged wiring or connectors near the module.

If those check out and a scan or wiring test points to the PAS, it's time to replace it. We need you or your shop to name the failed module before you send anything. If water got into the car, check the other modules as well. Our guide on ECUs damaged by water, a short or a jump-start explains what to look for.

Why a replacement PAS has to be cloned

You can't just bolt in a used PAS from another car. That unit still holds the other car's key data and is matched to its engine computer. Your car won't accept your keys with it, and the engine computer won't allow a start.

Cloning fixes that. We copy the data from your original PAS into the replacement, so the new unit:

  • Recognizes the keys you already have
  • Talks to your existing engine computer without a mismatch
  • Works like the original once it's plugged in

Your keys keep working, and you don't need to replace the engine computer too. If the engine computer is also part of the problem, see our ECU replacement and cloning service.

Porsche models we cover

Model Years
911 (996) 1999–2004
911 (997) 2005–2012
Boxster / Cayman (986 / 987) 1997–2012
Boxster / Cayman (981) 2013–2016
Carrera GT 2004–2007

Don't see your car? Call 908-777-5741 and we'll check.

Your two options and prices

  • $695: program your donor PAS. You send your original PAS and a donor unit. We clone your original into the donor.
  • $1,795: tested used PAS from us, programmed to your car. You send your original PAS. We supply a tested used unit and clone your data into it.

Each unit is programmed and tested on the bench before it ships back. Every repair, programming and cloning job has a 3-month warranty.

What to send us

  1. Your original PAS. It holds the data we need to clone, so we need it even if it's acting up.
  2. A donor PAS, if you picked the $695 option.
  3. The packing slip from your order.
  4. Proof of ownership. Immobilizer work requires the vehicle registration plus a photo ID, or a shop work order.

Pack the modules well so they don't move around in the box.

How mail-in service works

We're a mail-in lab in Columbia, NJ, and we serve all 50 states. There's no walk-in service.

  1. Look up your vehicle on our Porsche PAS replacement page.
  2. Send a request with your VIN and the PAS part number.
  3. Pay the invoice. Nothing ships until we've confirmed the job by VIN and part number.
  4. Ship the module with the packing slip.
  5. Plug it back in when it comes back.

Most jobs ship back within 1 to 3 business days after they arrive. You pay shipping both ways. Return shipping is added to your invoice at cost, and you can pick ground, 2-day or overnight.

If we can't fix a module, we send it back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

Frequently asked questions

Can you turn off the alarm or immobilizer?

No. We don't offer immobilizer deletes. We clone your PAS so the security system works the way the factory designed it, with your original keys.

Will I need new keys after the PAS is replaced?

Usually not. We clone your original PAS, so the replacement already has your key data and your current keys should keep working. If your keys are lost or damaged, contact us about mail-in key programming.

Can you tell me if my PAS is bad before I send it?

We can't diagnose a car by mail. You or your shop needs to confirm the PAS is the failed part first. Once you know, we'll confirm the job with your VIN and part number before anything ships.

Ready to fix your alarm?

If you've confirmed the PAS is causing the false alarms, the disarming trouble or the no-start, start a PAS order with your VIN and part number. You can also call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com.

Start an order Call 908-777-5741