Duvall's Auto LabClinical Care
for Modern Machines

Porsche 997 PAS Replacement: Immobilizer Fix by Mail

Can a failed PAS on a 997 be replaced without the dealer?

Yes. If your Porsche 911 (997, 2005–2012) won't start or won't recognize its keys, and the PAS has been identified as the failed part, you can replace it by mail. We clone the data from your original PAS into a replacement unit. That way the car, the engine computer and your existing keys all match again. If you already have a donor PAS, programming it costs $695. If you don't have one, we can supply a tested used PAS unit, programmed to your car, for $1,795. Either way, the job is bench-tested before it ships back to you.

What the PAS does on a 997

The PAS is the immobilizer and alarm unit on water-cooled 911 and Boxster / Cayman models, and that includes the 997. It stores the key data and talks to the engine computer. When you try to start the car, the PAS has to recognize the key and then tell the engine computer it's okay to run.

When the PAS fails, that conversation stops. Most owners notice one of two things:

  • The car won't start at all.
  • The car doesn't recognize its keys, even keys that worked fine yesterday.

Why you can't just bolt in a used PAS

You'll find used PAS units online from parted-out cars. But a PAS from another 997 carries that car's key data and pairing. Plug it into your car and your keys won't match it, and neither will your engine computer. The car still won't start.

That's why the replacement has to be cloned from your original. We read the data from your failed unit and write it into the replacement. When you plug the replacement in, your car sees the same immobilizer it has always had. Your keys keep working and the engine computer accepts the unit. You don't need new keys, and you don't need to re-pair anything at the dealer.

This only works if we have your original PAS. Even a unit that has stopped working usually still holds the data we need, so don't throw it away.

Confirm the PAS is the problem first

We can't diagnose a car by mail. Before you order anything, you or your shop need to confirm that the PAS is the module that failed. A 997 that won't start can have plenty of other causes, and a new PAS won't fix any of them. A good repair shop with Porsche-capable diagnostic equipment can check whether the immobilizer is blocking the start and whether the PAS is communicating.

If the diagnosis points at the engine computer instead, see our ECU replacement and cloning service. We clone engine computers by mail too.

Your two options and what they cost

Option 1: Send your own donor PAS, $695 If you've already found a used PAS that matches your car, send it along with your original. We clone your original into the donor, then program and test it.

Option 2: We supply the PAS, $1,795 Don't want to hunt for a used part? We provide a tested used PAS unit and program it to your car. You only send your original.

Every repair, programming and cloning job comes with a 3-month warranty.

What to send us

  • Your original PAS unit. We need it for cloning. Don't skip this.
  • Your donor PAS, if you chose the $695 option.
  • The packing slip from your order.
  • Proof of ownership. This is immobilizer work, so we need the vehicle registration plus a photo ID, or a shop work order if a repair shop is sending it.

Pack the units well so they can't knock around in the box. Keys don't need to be sent for a PAS clone because the replacement carries over your existing key data.

How mail-in service works

We're a mail-in lab in Columbia, NJ, and we serve owners and repair shops in all 50 states. There's no walk-in counter. Here's how it works:

  1. Look up your vehicle on our Porsche PAS replacement page. The 911 (997, 2005–2012) is on the list.
  2. Send a request with your VIN and the PAS part number.
  3. Pay the invoice. We confirm the job by VIN and part number before anything goes in the mail.
  4. Ship the unit(s) with the packing slip.
  5. Plug it back in. Most jobs ship back within 1 to 3 business days of arriving.

You pay shipping both ways. Return shipping (ground, 2-day or overnight) is added to your invoice at cost. If we can't complete the job, we send your module back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

Other Porsche and VAG immobilizer work

The PAS covers the 996, 997, Boxster/Cayman 986/987 and 981, and Carrera GT. Some later Porsche models use keyless-entry modules instead. If that's what you have, take a look at our Audi, Porsche & Bentley Kessy module cloning service.

Frequently asked questions

Will my existing 997 keys still work after the PAS is replaced?

Yes. We clone your original PAS, so the replacement holds the same key data. Your keys and engine computer will match the new unit just as they matched the old one.

My original PAS is completely dead. Can you still clone it?

Send it in. A failed unit often still holds the data we need. If we can't complete the job, we return the module and refund the service charge. You'd pay return shipping and the $95 bench-test fee.

Can you remove or bypass the immobilizer instead?

No. We don't do immobilizer deletes. We restore the system so it works the way Porsche designed it, with your own keys.

Ready to get your 997 running again?

Once your shop has confirmed the PAS is at fault, start a PAS order on our Porsche PAS replacement page. If you have questions first, call 908-777-5741 (Mon–Fri, 9am–6pm) or email sales@duvallsautolab.com. Have your VIN and PAS part number ready, and we'll confirm the job before anything ships.

Start an order Call 908-777-5741