Duvall's Auto LabClinical Care
for Modern Machines

Nissan Immobilizer or Intelligent Key Module Clone by Mail

Can a Nissan immobilizer or key module be cloned?

Yes. If your Nissan's immobilizer, Intelligent Key unit, steering lock (ESCL) or Hands-Free module (HFM) has failed, we can usually copy the data from your original unit onto a replacement. The car then accepts the new part as if it were the original, with no dealer visit. We do this by mail for repair shops and owners in all 50 states. The service starts from $195, and the exact price for your car shows in the vehicle lookup on our home page.

The problem in plain words

Every Nissan with a factory immobilizer checks for the right key before it lets the engine run. On older cars that check is done by the NATS (Nissan Anti-Theft System). On newer push-start cars it's done by the Intelligent Key unit, the steering lock or the Hands-Free module. If that part fails, or if someone fits a used one from another car, the check fails and the car won't start. Common signs include:

  • The engine cranks but won't start, or won't crank at all
  • The security or key light flashes or stays on
  • A "Key not detected" or "No key" message on a push-start car
  • A steering wheel that won't unlock (common with ESCL failures)
  • Keyless entry or push-button start that stops working

These symptoms can also come from a weak key battery, wiring, a low car battery or a different module. That's why the failed part needs to be confirmed before you send anything (more on that below).

What these modules do

Which module handles security depends on your model and year. Here's what we cover:

  • NATS immobilizer (in the ECM or BCM): 240SX S14 1998, Altima L30/L31 1998-2006, Frontier D22 1998-2004, Maxima A32/A33 1998-2003
  • Intelligent Key unit (push-start only): 350Z Z33 2003-2009, Altima 2007-2012 and 2013-2018, Armada 2004-2015, Cube 2009-2014, Frontier 2005-2021, Juke 2011-2017, Leaf 2011+, Maxima A34/A35 2004-2014 and 2016-2023, Murano Z50 2003-2008, 2009-2014 and 2015+, NV / NV200 2012-2021
  • ESCL (steering lock): 370Z 2009-2020, Armada 2017-2024, GT-R 2009+
  • HFM (Hands-Free / smart-entry module): Altima L34 2019+, Ariya 2023+, Frontier 2022+, Kicks 2018+

The Intelligent Key coverage applies to push-start cars only. If your Nissan uses a regular turn key, that's a different setup, so check the lookup or ask us before ordering.

On the older NATS cars the immobilizer data sits inside the engine computer or body control module. If that's your situation, our Nissan BCM programming and clone page and our ECU replacement and cloning page explain those jobs in more detail.

Why a replacement has to be cloned or programmed

A security module isn't plug-and-play. Each one stores the car's identity, such as key data, security codes and in many cases the VIN, and it has to match the other modules in the car. A new or used replacement doesn't have your car's data, so the car treats it as a stranger and refuses to start.

Cloning fixes this by reading the data from your original module and writing it to the replacement. Since the car sees the same data it has always seen, the swap is usually just unplug and plug in. A dealer would often handle this with a new part plus on-car programming. Cloning skips that step.

Confirm the failed module first

We can't diagnose a car by mail. Before you order, you or your shop need to confirm which module has failed, normally with a scan tool, by checking codes and testing power and ground. If we clone a module that wasn't the cause, the car will still have the same fault.

What to send us

  1. Your original module. We need it to read the data from, even if it's failing.
  2. The replacement module, if you already have one. If you don't have a module to send, we can source a programmed replacement unit for you. Ask when you send your request.
  3. Your VIN and the module part number, which you'll include in your request.
  4. Proof of ownership. Key and immobilizer work requires your registration plus a photo ID, or a shop work order.
  5. The packing slip from your order, inside the box.

Pack the modules in anti-static bags with plenty of padding. Please don't send keys or other parts unless we ask for them.

How mail-in service works

  1. Look up your vehicle on duvallsautolab.com to check coverage and pricing.
  2. Send a request with your VIN and the module part number. Nothing ships until we've confirmed the job by VIN and part number.
  3. Pay the invoice. You pay shipping both ways. Return shipping is added to the invoice at cost, and you choose ground, 2-day or overnight.
  4. Ship the module with the packing slip.
  5. Plug it back in when it comes back. Most jobs ship back within 1 to 3 business days of arriving.

Every repair, programming and cloning job carries a 3-month warranty. If we can't fix or clone your module, we send it back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

A note on what we don't do: we never offer immobilizer deletes. Our job is to get your factory security system working again, not to bypass it.

Frequently asked questions

Will my existing Nissan keys still work after a clone?

Cloning copies the key data from your original module onto the replacement, so the goal is for your car to keep working with the keys it already knows. If your original module can't be read, or you also need keys made, tell us when you request the job. We'll go over the options, including mail-in key programming.

Can I send a used module from a junkyard or eBay?

Usually, yes, as long as it's the correct part for your car. Send us the part number of the used unit along with your original part number, and we'll confirm they're compatible before anything ships.

My Nissan isn't on the list. Can you still help?

Maybe. Check the vehicle lookup on our website first, then email sales@duvallsautolab.com or call 908-777-5741 (Mon to Fri, 9am to 6pm) with your VIN and module part number, and we'll let you know.

Once you know which module failed, start your order by looking up your Nissan. We'll confirm the job and get it back to you quickly.

Start an order Call 908-777-5741