Duvall's Auto LabClinical Care
for Modern Machines

Ford Module Programming or Cloning by Mail: PSCM, LCM

Can a Ford module be programmed or cloned by mail?

Yes. If you've already found the failed module on your Ford, you can mail it to us. We clone it or program it to your VIN so the replacement plugs in and works. We cover power steering control modules (PSCM), lighting control modules (LCM), driver door switch modules (DDSM), climate control (EATC) and 4x4 modules on a long list of Ford trucks, SUVs and cars. Module programming or cloning costs from $175. To see the exact price for your vehicle, use the vehicle lookup on the Duvall's Auto Lab home page. It's all done by mail and we accept work from all 50 states. Most jobs ship back within 1 to 3 business days after they arrive.

The problem: a "new" module that doesn't work

Here's how it usually goes. A Ford module fails. Maybe the steering goes heavy, the lights act up, or the door switches or the climate control stop working. You buy a replacement, used or new, and bolt it in. Then it doesn't work, or it works only partly and sets new fault codes.

Usually the part itself is fine. The trouble is that the module doesn't match your car yet. Ford modules store the vehicle's VIN and its configuration data. A used module still carries the VIN and settings of the donor vehicle. A blank one may have no setup at all. Until the right data is loaded, your Ford won't treat that module as its own.

What these Ford modules do

Here's a plain-language look at the modules this service covers:

  • PSCM (power steering control module): Controls the electric power steering assist. When it fails or isn't set up, steering can feel heavy and warning lights may come on.
  • LCM (lighting control module): Runs exterior and interior lighting.
  • DDSM (driver door switch module): The driver's door switch panel, which usually handles windows, locks and mirrors.
  • EATC (electronic automatic temperature control): The automatic climate control.
  • 4x4 module: Controls four-wheel-drive operation.

Which Ford models are covered

Here's what our site currently lists:

  • PSCM (power steering): Bronco 2021+, Bronco Sport 2021+, C-Max 2013-2018, EcoSport 2018-2022, Edge 2015-2022, Escape 2013-2019 and 2020+, Expedition 2018-2021 and 2022+, Explorer 2011-2019, Explorer U625 2020+
  • LCM (lighting) and DDSM (driver door): E-Series 2009-2020, Edge 2007-2014, Escape 2008-2012, Expedition 2007-2017, Explorer 2006-2010, Explorer Sport Trac 2007-2010, F-150 2004-2014
  • 4x4 module: F-150 2004-2008
  • LCM and EATC (climate): Contour 1998-2000, Crown Victoria 1998-2005, Escort / ZX2 1998-2003, Excursion 2000-2005, Expedition 1997-2006, Explorer 1995-2005, F-150 1997-2003

Coverage changes over time, so check your exact vehicle and module in the lookup before you ship anything.

Cloning vs. programming: what's the difference?

Cloning copies the data from your original module into the replacement. The replacement ends up with the same VIN and configuration as the old one, so in most cases it's plug-and-play. This is the best option when the original module can still be read, even if it has stopped working properly in the car.

Programming loads your VIN and the correct data into a replacement when cloning isn't the right fit. If you don't have a module to send, we can also source a programmed replacement unit for you.

If you're not sure which one you need, send us the VIN and the module part number and we'll confirm before anything ships. For engine computers, see our page on ECU replacement and cloning.

First, confirm the failed module

We can't diagnose a car by mail. Before you order, you or your repair shop need to confirm which module has failed. That means scanning for codes, checking power, grounds and wiring, and ruling out the simpler causes. A bad connector or a blown fuse can look a lot like a dead module, and replacing a good module won't fix a wiring problem.

If you've already put in a replacement and it still won't cooperate, the module probably needs programming. For a similar problem with engine computers, read Replacement ECU Installed, Cranks but Won't Start?

What to send us

  • Your original module, if you have it, plus the replacement module for a clone job
  • The VIN and the module part number (printed on the module label)
  • The packing slip we provide when your order is confirmed

If you don't have a module to send, tell us and we'll quote a programmed replacement unit.

How the mail-in service works

  1. Look up your vehicle on our website to confirm coverage and see the price.
  2. Send a request with the VIN and the module part number.
  3. Pay the invoice. Nothing ships until we've confirmed the job by VIN and part number.
  4. Ship the module with the packing slip. Pack it well so it doesn't move around in the box.
  5. Plug it back in when it comes back.

You pay shipping both ways. We add return shipping to your invoice at cost, and you can choose ground, 2-day or overnight. Every repair, programming and cloning job comes with a 3-month warranty. If we can't fix a module, we send it back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

The service is built for repair shops, but owners are welcome too. Many shops use us so they don't have to tow a customer's vehicle to the dealer just for programming.

Frequently asked questions

Can I use a used Ford module from a salvage yard?

Usually, yes, as long as it's the correct part for your vehicle. A used module carries the donor vehicle's VIN and configuration, so it needs to be cloned from your original or programmed to your VIN before it will work properly. Send us both part numbers and we'll confirm it can be done.

How much does Ford module programming or cloning cost?

It starts from $175. The exact price for your vehicle and module appears in the vehicle lookup on our home page. Shipping both ways is extra, and return shipping is billed at cost.

Can you tell me which module is bad?

No. We can't diagnose a vehicle by mail. You or your shop need to confirm the failed module first. Once you know which one it is, we can handle the cloning or programming.

Ready to start?

Look up your Ford on duvallsautolab.com and send us your VIN and module part number to start an order. Questions? Call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com.

Start an order Call 908-777-5741