BMW Key Programming by Mail, Including All Keys Lost
Can a BMW key be programmed by mail?
Yes. You can get a BMW key programmed by mail, whether you need a spare or you've lost every key. You pull two modules from the car and ship them to us: the key or immobilizer module (EWS, CAS, FEM or BDC, depending on the model) and the engine computer (DME, or DDE on some diesels). We program a new key to those modules on the bench and ship everything back. The key blank is included. When the modules go back in the car, the key should work right away with no dealer visit and no tow.
Why BMW keys are hard to replace
On a BMW, the key isn't just a piece of cut metal. Every key has a transponder chip, and on most models it also has a remote. The car checks that chip before it lets the engine run. The record of which keys are allowed lives in the key module, and that module is paired with the engine computer. If the key, the key module and the DME don't all match, the car won't start.
Adding a duplicate when you still have a working key is the easier job. All keys lost is harder because there's no working key to start from. The key data has to be read directly from the modules so a new key can be written to match. That kind of work is much more reliable on a bench, where we can get at the modules directly, than through the car's diagnostic port.
Which module your BMW uses
BMW has used several immobilizer systems over the years. Here's how the generations break down. For each one, you send the key module plus the engine computer.
EWS 3 / 4 (legacy): send EWS3/4 and DME - 3-Series E36 (1998) and E46 (1999-2006) - 5-Series E39 (1997-2003) - 7-Series E38 (1998-2001)
CAS 1 / 2: send CAS1/CAS2 and DME - 5-Series E60/E61 (2004-2007) - 6-Series E63/E64 (2004-2007) - 7-Series E65/E66 (2002-2008)
CAS 3 / 3+: send CAS3 and DME - 1-Series E82/E87/E88 (2004-2013) - 3-Series E90/E91/E92/E93 (2006-2013) - 5-Series E60/E61 (2008-2010) - 6-Series E63/E64 (2008-2010)
CAS 4 / 4+: send CAS4 and DME - 5-Series F10/F11 (2011-2016) and 5-Series GT F07 (2010-2017) - 6-Series F12/F13 (2012-2018) and Gran Coupe F06 (2012-2019) - 7-Series F01/F02 (2009-2015)
FEM (Front Electronic Module): send FEM and DME - 1-Series F20/F21 (2012-2019) - 2-Series F22/F23 (2014-2021) - 3-Series F30/F31 (2012-2019) and 3-Series GT F34 (2013-2020) - 4-Series F32/F33/F36 (2014-2020)
BDC (Body Domain Controller): send BDC and DME - 2-Series Active Tourer F45 / Gran Tourer F46 (2014-2021) - 2-Series Active Tourer U06 (2022+) - 2-Series Gran Coupe F44 (2020+)
BDC (Body Domain Controller): send BDC and DME / DDE - 2-Series G42 (2022+) - 3-Series G20/G21 (2019+) - 4-Series G22/G23/G26 (2021+) - 5-Series G30/G31 (2017-2023) and G60 (2024+) - 7-Series G11/G12 (2016-2022)
If your car isn't on this list, or you're not sure which version you have, look it up on our website before you pull anything. The VIN and the module part number settle the question.
Why we need the engine computer too
People often ask why the DME has to come along when they only need a key. The key module and the engine computer share security data. When we program a key, especially when all keys are lost, the whole set has to stay matched. Sending both lets us check and line up that pairing so the car starts when you plug everything back in. If you're swapping in a different engine computer, read our page on ECU replacement and cloning first. If a swap has already left you with a warning on the dash, see immobilizer light on after swapping the engine computer.
Confirm the problem before you ship
We can't diagnose a car by mail. Before you send anything, you or your shop needs to confirm that the problem really is a missing or unprogrammed key. A car that won't start can also have a weak battery, a failed starter or a different module fault. New keys won't fix any of those. If you have a working key and the car still won't start, have it checked out before you order.
How mail-in BMW key programming works
- Look up your vehicle on duvallsautolab.com. The key finder on the home page shows the exact price for your BMW.
- Send a request with your VIN and the module part numbers.
- Pay the invoice. Nothing ships until we've confirmed the job by VIN and part number.
- Ship the modules with the packing slip. Pack them well, since they're electronic parts.
- Plug them back in. The key arrives programmed and ready to use.
Most jobs ship back within 1 to 3 business days after they arrive. You pay shipping both ways. Return shipping (ground, 2-day or overnight) is added to the invoice at cost.
Proof of ownership is required for all key and immobilizer work. Send a registration and photo ID, or a shop work order. We serve repair shops and owners in all 50 states.
Getting the blade cut
The programmed key handles the electronics. You still need a cut blade to open the doors and, on older models, to turn the ignition. We can cut keys by VIN for $155 flat, so your new key works both electronically and mechanically.
Frequently asked questions
Can you program a BMW key if I've lost every key?
Yes. All keys lost is one of the main reasons people use this service. Send the key module listed for your model along with the DME (or DDE), and we'll program a new key on the bench. The key blank is included.
Is there a warranty?
Every programming job comes with a 3-month warranty. If we can't complete the job, we send your modules back and refund the service charge. You pay return shipping and a $95 bench-test fee.
Do I have to bring the car to you?
No. We're mail-in only, with no walk-in service. You or your shop removes the modules, ships them to us and reinstalls them when they come back.
Ready to get your BMW key made?
Once you've confirmed the car needs keys, look up your BMW at duvallsautolab.com and start your order with the VIN and module part numbers. Questions? Call 908-777-5741 (Mon to Fri, 9am to 6pm) or email sales@duvallsautolab.com.
