Duvall's Auto LabClinical Care
for Modern Machines

BMW Airbag Module Crash Data Reset (MRS/ACSM)

What a BMW crash-data reset fixes

When a BMW is in a collision that sets off the airbags or seatbelt pretensioners, the airbag control module records the event. BMW calls this module the MRS on older cars and the ACSM on newer ones. Once crash data is stored, the module locks itself. Even after the bodywork is done and the deployed parts are replaced, the airbag light stays on. The stored crash fault won't clear with a normal scan tool.

At that point most shops have two choices: buy a new module from the dealer and have it coded to the car, or reset the original. A crash-data reset clears the stored collision record and puts the module back to a usable state. It keeps the car's own module, so it's already matched to that vehicle.

What the MRS / ACSM module does

The airbag module is the brain of the car's restraint system. It reads the crash and occupancy sensors, decides whether to fire the front, side and curtain airbags and the belt pretensioners, and keeps checking the whole system for faults every time you start the car. If anything is wrong, it turns on the airbag warning light.

Since the module is the thing that decides when airbags fire, BMW designed it to lock after a deployment. The idea is that a module that's already been through a crash shouldn't be trusted until someone deals with it on purpose.

Why you can't just swap in a used module

A used MRS or ACSM from a salvage car usually won't work in your BMW. These modules are coded to the vehicle they came from, and a lot of them come out of wrecked cars, so they may have crash data stored already. Drop one into a different car and you'll often still have an airbag light, plus coding or VIN mismatch faults.

That's why replacing the module takes cloning or programming. Resetting the original module avoids that problem completely, since it's already set up for the car. If the module is damaged and not just locked, we also offer airbag module repair, cloning and VIN programming. Ask us when you send your request.

BMW models we cover

The crash-data reset covers the airbag module on these BMW models:

  • 1-Series E82/E87/E88 (2004-2013): MRS / ACSM; F20/F21 (2012-2019): ACSM
  • 2-Series F22/F23 (2014-2021), Active Tourer F45 / Gran Tourer F46 (2014-2021), Gran Coupe F44 (2020+), G42 (2022+), Active Tourer U06 (2022+): ACSM
  • 3-Series E36 (1998) and E46 (1999-2006): MRS; E90/E91/E92/E93 (2006-2013): MRS / ACSM; F30/F31 (2012-2019), GT F34 (2013-2020), G20/G21 (2019+): ACSM
  • 4-Series F32/F33/F36 (2014-2020) and G22/G23/G26 (2021+): ACSM
  • 5-Series E39 (1997-2003): MRS; E60/E61 (2004-2010): MRS / ACSM; GT F07 (2010-2017), F10/F11 (2011-2016), G30/G31 (2017-2023), G60 (2024+): ACSM
  • 6-Series E63/E64 (2004-2010): MRS / ACSM; F12/F13 (2012-2018) and Gran Coupe F06 (2012-2019): ACSM
  • 7-Series E38 (1998-2001): MRS

Pricing starts from $95. You'll see the exact price for your car in the vehicle lookup on our home page.

Confirm the problem before you send anything

We can't diagnose a car by mail. Before you pull the module, you or your shop should scan the car and confirm the airbag module is what's holding the fault, meaning it shows stored crash data and isn't just reporting a bad sensor, wiring problem or connector issue.

A reset doesn't replace anything that deployed. Have a qualified shop replace any deployed airbags, pretensioners, crash sensors and other damaged restraint parts. Once the rest of the system is repaired, a reset module can clear up the light. If those other faults are still there, the light will come back.

What to send us

  • The airbag module (MRS or ACSM) out of the car, in an anti-static bag if you have one, packed well enough that it can't move around in the box
  • The packing slip we send after your order is confirmed
  • Just the module. Keep connectors, brackets and any other parts with the car.

When you submit the request, include the VIN and the module part number printed on the module label. Nothing ships until we've confirmed the job by VIN and part number. That way you don't pay to ship a module we can't help with.

How mail-in service works

We're a mail-in lab and work with repair shops and owners in all 50 states. Here's how it goes:

  1. Look up your vehicle on our website to confirm coverage and see your price.
  2. Send a request with the VIN and the module part number.
  3. Pay the invoice after we confirm the job.
  4. Ship the module with the packing slip.
  5. Plug it back in when it comes back.

Most jobs ship back within 1 to 3 business days of arriving. You pay shipping both ways. Return shipping (ground, 2-day or overnight) is added to the invoice at cost, so you pick the speed that suits your schedule.

Every repair, programming and cloning job has a 3-month warranty. If we can't fix a module, we send it back and refund the service charge. In that case you pay return shipping and a $95 bench-test fee.

Start your BMW crash-data reset

Have the VIN and the module part number ready, then go to the Duvall's Auto Lab vehicle lookup and order page to check coverage and get your exact price. If you have questions first, email sales@duvallsautolab.com or call 908-777-5741, Monday to Friday, 9am to 6pm. Once we confirm your job by VIN and part number, we'll send the invoice and packing slip so you can ship the module.

Start an order Call 908-777-5741